RA Mayes | Conducted EMC Test Systems Products Index

Conducted EMC Test Systems Index

Conducted EMC Test Systems
Products	Features
Automotive EMC Test Systems	Auto Manufacturer Specific EMC Test Systems
CDNs	Coupling/Decoupling Network (CDN)
Conducted Test Systems	Conducted EMC Test Systems, Fully Automated
Conducted EMC Test	Absorbing Clamp, Harmonics & Flicker, Power Supply
Comparison Noise Emitters (CNE)	Radiated and Conducted measurement systems validation & verification
Conducted Reference Sources	EMC conducted bands A and B. Specifically designed to check & calibrate LISNs
Comb Generators	50 MHz to 26 GHz Conducted measurement systems validation & verification
Economical EMC Compliance Test Systems	LaplaCell, Spectrum Analyzer, Generator, Site Source
Electrical Fast Transient Generators	EFT, Surge & Burst Generators
E-Field Probes & Meters	Near Field Probes, Monitors, RF Hazard
ESD Test Systems Rental	Rent ESD & Pulsed EMI Test Equipment
ESD Simulator Guns	16.5Kv & 30Kv ESD Air & Contact Simulators
Harmonics and Flicker Analyzer	AC Mains Analyzer, Low Distortion Power Supply
High Bandwidth ESD Target	IEC 61000-4-3 (2009 V3) ESD Targets
Line Impedance Stabilization Networks (Solar)	Solar LISN's, CISPR, MIL-STD, 10 to 500 Amp
New Style Solar LISNs	CISPR 16-1-2, CISPR 22, FCC, ANSI C63.4, 10 to 100 Amp
Line Impedance Stabilization Network (Laplace)	Laplace LISN's, CISPR, MIL-STD, 10 to 500 Amp
Pulsed EMI Test	Pulsed EMI Test Systems
RF Shielded Rooms	Cabinets, Copper Screen, Doors, Modular, Welded
Totally Integrated Lab Software	EMC Test, GTEM, MIL-STD Test, RI, RE, CI, CE


Laplace Conducted Emissions Measurement System Conducted emissions are measured in the range of 150KHz - 30MHz for most products. Options are available for extension down to 9KHz, as required by EN55015. Informal quick check and investigative tasks can be accomplished using EMI adaptors, which couple the noise signals from the power lines directly to your scope or spectrum analyser. Equipment required for 150KHz - 30MHz: A LISN16A1P LISN. B SA1002 EMC analyser. C RF910 Pre-selector. D P2085 Pre-amplifier. E Software for your PC. For testing 9KHz-30MHz (band A & B) as required by EN55015 (and other) standards: A LISN-A-16A1P LISN. B SA1002A EMC analyser with band A option fitted. C RF915 Pre-selector. D P2085 Pre-amplifier. E Software for your PC. Laplace Conducted RF Immunity Conducted immunity tests are divided into 2 groups: RF tests: conducted RF to IEC61000-4-6 Others: covering ESD, transients, bursts, dips and interruptions. IEC61000-4-2 ESD IEC61000-4-4 EFT/BURST IEC61000-4-5 SURGE IEC61000-4-8 MAGNETIC FIELD (POWER FREQUENCY) IEC61000-4-9 MAGNETIC FIELD (PULSED) IEC61000-4-11 DIPS AND INTERUPTS. Schloder ESD Simulator 16.5 kV The test generator SESD 216 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depend on the Equipment Under Test (EUT) and the test set-up for laboratory tests the IEC standard shows two test methods. Air discharge (AIR) and Contact discharge (CON) Schloder ESD-Simulator 30 kV The test generator SESD 230 simulates electrostatic discharge as defined in the standard IEC / EN 61000-4-2. Depend on the Equipment Under Test (EUT) and the test set-up for laboratory tests the IEC standard shows two test methods. Air discharge (AIR) & Contact discharge (CON) CGE Comb Generator Emitters Comb Generator Emitters (CGEs) are designed and manufactured by Eurofins York (formerly York EMC Services) and sold Globally for the verification of test and measurement setups and to ensure the validity of EMC and RF laboratory tests. CNE Comparison Noise Emitters Comparison Noise Emitters (CNEs) are signal sources designed and manufactured by Eurofins York (formerly York EMC Services) and sold globally for the verification of test and measurement setups and to ensure validity of EMC and RF laboratory tests. YRS Combined Comb and Noise Sources Dual Mode Comb and Continuous Broadband Noise Sources are designed and manufactured by Eurofins York (formerly York EMC Services) and sold globally for the verification of test and measurement setups, and to ensure validity of EMC and RF laboratory tests.

Copyright © 2001-2024 R. A. Mayes Company, Inc.
An Electro Mechanical Research and Development (EMRAD) Corporation, Company
See our Privacy Policy All the data files on our website require Adobe Acrobat Reader!

Conducted EMC Test Systems

Laplace Conducted Emissions Measurement System

Laplace Conducted RF Immunity

Schloder ESD Simulator 16.5 kV

Schloder ESD-Simulator 30 kV

CGE Comb Generator Emitters

CNE Comparison Noise Emitters

YRS Combined Comb and Noise Sources