Translate The Website (Starts on Home Page)    
RA Mayes EMC Test
Follow Us On LinkedIn   Twitter   facebook
R A Mayes Logo and Home Page Call Nationwide 1-800-742-9447

 

Antenna & Instrument Calibration

EMC Test Antenna & Instruments Calibration

Keysight Technologies A2LA Accredited
 

Liberty Labs, World Cal, and Liberty Labs Canada have joined together
 to form the Liberty Calibration team, now Keysight Iowa Center.
providing you with a convenient solution for your accredited calibration needs.

All of our calibration services have been discontinued, except for Dynamic Sciences International Instruments.

Please contact Keysight Calibration for you calibration requirements.

https://www.keysight.com/us/en/products/services/calibration-services.html


All Liberty Calibration companies are ISO/IEC 17025:2005, ANSI/NCSL Z540-1-1994, and ANSI/NCSL Z540.3 accredited by A2LA.

Liberty Calibration is committed to providing the services you need to satisfy your business requirements.

Liberty Labs OATS


Liberty Labs Logo
Liberty Labs
50x80m CALTS Antenna Range
Antenna Calibration 10Hz-40GHz
Isotropic Probe Calibration
ESD/LISN/CDN/Probe Calibrations
Antenna Pattern Measurements
Site Attenuation Measurements
Site VSWR Measurements
EMI/EMC Site Surveys

World Cal Logo
World Cal
Receiver CISPR 16-1-1
Mechanical/Dimensional
Accelerometer Calibrations
Surge/Burst Calibrations
Flicker/Harmonic Calibrations
Temperature/Humidity Calibrations
RF/EMI/EMC Instrument Calibration
General Electronic Calibration
RF Power Sensor Calibration
High Voltage Calibrations

Liberty Labs Canada Logo
Liberty Labs Canada
RF/EMI/EMC Instrument Calibration
Receiver CISPR 16-1-1
Surge/Burst Calibrations
RF Power Sensor Calibration
LISN/ISN/CDN Calibration
Oscilloscopes
Spectrum & Network Analyzers


EMC Test Antenna & Instrumentation Calibration Services Available

  • 50 x 80 meter OATS Antenna Range
  • Antenna Calibration 5 Hz to 50 GHz
  • Isotropic Probe Calibration
  • ESD/LISN/CDN's/Probe Calibrations
  • Antenna Pattern Measurements
  • Site Attenuation Measurements
  • Site VSWR Measurements
  • General Electronic Calibrations
  • RF Power Sensor Calibration
  • CISPR 16-1-1
  • EMI/EMC Site Surveys
  • Onsite Calibration Services
  • Surface Plate Calibrations
  • Accelerometer Calibrations
  • Surge/Burst Calibration
  • Flicker/Harmonic Calibrations
  • RF/EMI/EMC Instrument Calibration
  • Onsite Calibration Services
  • A2LA Accredited Calibration

Full Range of Calibration Services on EMC/RF Equipment

  • Absorbing Clamp
  • Adapter Kit
  • Amp
  • Attenuator
  • Band Pass Filter
  • Bicon Antenna
  • Bilog Antenna
  • Broadband Exposure Meter
  • Cable
  • Cal Fixture
  • Capacitive Voltage Probe
  • Capacitor
  • CLS Antenna
  • Comb Generator (Verification Only)
  • Coupling/Decoupling Network-CDN
  • Current Monitor
  • Current Probe
  • Directional Coupler
  • E-Field Generator
  • E-Field Probe
  • E Field Sensor
  • ELF Magnetic Meter
  • EM Field Analyzer
  • ESD Gun
  • ESD Target
  • Field Probe
  • Field Sensor
  • Field Strength Meter
  • Gaussmeter
  • High Pass Filter
  • Horn Antenna
  • Injection Clamp
  • Injection Probe
  • ISN
  • Isotropic Probe
  • Limiter
  • Line Voltage Probe
  • Line Impedance Stabilization Network-LISN
  • LMT-B
  • Load
  • Loop Antenna
  • Low Pass Filter
  • Log Periodic Antenna-LPA
  • Magnetic Field Meter
  • Microwave Radiation Check Source
  • Microwave Survey Meter
  • Monopole Antenna
  • Notch Filter
  • Power Amplifier
  • Preamp
  • Radiation Hazard Meter
  • Radiation Monitor
  • Radiation Probe
  • Reference Source
  • Reflector Antenna
  • RF Radiation Sensor
  • Rod Antenna
  • Site Source (Verification Only)
  • Survey Meter
  • Terminator
  • TLISN
  • Transient Limiter
  • Type N Calibration Kit
  • Voltage Probe

  • Fully Self-Contained
  • Temperature, Humidity & ESD Controlled
  • Independent Renewable Energy Powered Calibrations
  • You'll receive the same quality & service from our fixed location in Kimballton, IA & Elk Horn, IA
  • Times to suit your schedule
  • At your place of business
  • Quick turn around time
  • ISO 17025 Accredited Calibrations
  • Nationwide Coverage
  • We can calibrate your equipment in our mobile lab or within your facility
From radios to radar, your system is only as good as its antenna. Keysight's EMC Test Antenna Calibration Lab delivers SI-traceable results for manufacturers and organizations requiring a proven provider of standards-compliant measurements, offering on-demand flexible capacity that meets high volumes of antenna calibrations. With the world's largest open-area test site (OATS), our calibration test sites (CALTS) compliant facility is uniquely able to meet your specific requirements - ANSI, CISPR, IEEE, MIL-STD, SAE with unmatched precision and repeatability.
Select the right calibration for your instruments calibration. Maybe you need measurement uncertainties, guardbanding, an accredited calibration, or a primary standards lab calibration. Alternatively, perhaps your calibration report needs to satisfy a particular ISO or ANSI metrology standard such as IS0 17025:2005 or ANSI Z540.3-2006. Keysight offers a wide range of calibrations to ensure you meet your requirements to your local and global needs.


Copyright © 2001-2024  R. A. Mayes Company, Inc.
An Electro Mechanical Research and Development (EMRAD) Corporation, Company

See our Privacy Policy    All the data files on our website require Adobe Acrobat Reader!